|
It is currently Wed 05. Feb 2025 7:58:40
|
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 2 posts ] |
|
| Author |
Message |
|
CP410
|
 Posted: Thu 23. Jan 2025 16:48:14 |
|
Joined: Wed 06. Nov 2024 12:53:11
Posts: 2
|
|
Hallo,
ich wollte mein W1 auf 3.7.2 updaten.
Dazu habe ich die Wave eingeschaltet und das W1, das im Heli eingebaut ist, über den Flugakku bestromt.
Dann in der Wave auf Update und schon ging es los.
Jetzt hab ich seit 45 min auf der Wave "Schreibe und 7%" stehen.
Ausstecken ist wahrscheindlich keine gute Idee.
Was kann ich machen?
|
|
| Top |
|
 |
|
ZeXx86
|
Posted: Mon 27. Jan 2025 9:14:50 |
|
 |
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12524
|
|
Hello,
wireless updating should take no more than 2 minutes normally.
Please unplug the unit - this will not cause anything wrong fortunately. Then update Spirit Wave to the latest firmware 1.0.19. Then we recommend updating also Receiver firmware to the latest version too (1.10.5).
Please make sure there is no strong source of interference, because when doing update data are checked. If they were received incorrectly then transmission is repeated until it is correct.
Alternative solution is - you can update both Spirit W1 and internal receiver with PC software.
_________________
Spirit System developer
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 2 posts ] |
|
 |
Who is online |
 |
Users browsing this forum: No registered users and 3 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
