| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| GYRO NORMAL RATE+STABY https://www.spirit-system.com/phpBB3/viewtopic.php?f=35&t=2151 |
Page 1 of 1 |
| Author: | delfo [ Fri 11. Aug 2017 10:51:41 ] |
| Post subject: | GYRO NORMAL RATE+STABY |
Hi, I use two banks: In the first I do not have the staby and the gyro (adjustable by tx with knob) has the HL-0-Normal function. In the second I have staby, but the gyro only has HL-0-HL + Staby functions. Is it possible in bank 2 to have the HL-0-Normal + Staby function? I not want HL with Staby.  Thanks |
|
| Author: | delfo [ Fri 25. Aug 2017 17:59:30 ] |
| Post subject: | Re: GYRO NORMAL RATE+STABY |
Hi, same replay? |
|
| Author: | ZeXx86 [ Fri 25. Aug 2017 19:38:49 ] |
| Post subject: | Re: GYRO NORMAL RATE+STABY |
Hi, sorry for late reply. You can configure it in this way: Bank 0: Stabi/Function - Disabled Bank 2: Stabi/Function - Stabilisation (Normal or Acro) For both Banks set Global Gain to a negative value. Then there will be only Normal mode or Stabilisation. With Bank switch you can change it anytime. |
|
| Author: | delfo [ Fri 25. Aug 2017 19:57:45 ] |
| Post subject: | Re: GYRO NORMAL RATE+STABY |
Thanks, I try 
|
|
| Author: | delfo [ Sat 26. Aug 2017 13:22:54 ] | ||
| Post subject: | Re: GYRO NORMAL RATE+STABY | ||
Hi I set general gain with negative value for both banks, but the situation is non changed, see screenshot. In this situation I need the Normal+Staby not Head-look+Staby. Is possible? Thanks
|
|||
| Author: | ZeXx86 [ Sat 26. Aug 2017 16:14:44 ] |
| Post subject: | Re: GYRO NORMAL RATE+STABY |
Ah, this is not possible. Otherwise stabilisation mode will not work. It would not hold required attitude. So then Stabilisation mode will have no meaning in this case. |
|
| Author: | delfo [ Sat 26. Aug 2017 18:06:33 ] |
| Post subject: | Re: GYRO NORMAL RATE+STABY |
Ok, many thanks. |
|
| Author: | ZeXx86 [ Sat 26. Aug 2017 18:42:02 ] |
| Post subject: | Re: GYRO NORMAL RATE+STABY |
You are welcome. But you can still enable Normal mode (without active Stabilisation). This will make a different behavior. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|