|
It is currently Mon 25. Nov 2024 1:13:04
|
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 4 posts ] |
|
| Author |
Message |
|
stipsi
|
 Posted: Sun 03. Sep 2017 17:46:11 |
|
Joined: Fri 10. Mar 2017 17:27:00
Posts: 36
|
|
Have now my Spirit Aero 1.2.0 connected with Jeti EX-BUS. Why does the Rudder have a different channel assignment than in my remote control? In my DC-16 at servo output 4, in the Spirit menu channel 6? This should also be channel 4 or?
|
|
| Top |
|
 |
|
ZeXx86
|
Posted: Sun 03. Sep 2017 18:57:07 |
|
 |
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Hello,
default channel assignement (in both unit and Jeti radio) should work out of the box.
Channel numbers may differ because you can assign to any channel any function in the radio.
Also it could differ, because each manufacturer have different layout. So numbers are not important at all. Important is mapped function.
You can verify corresponding functions in the Channels window or Diagnostic tab.
_________________
Spirit System developer
|
|
| Top |
|
|
|
stipsi
|
Posted: Sun 03. Sep 2017 19:01:52 |
|
Joined: Fri 10. Mar 2017 17:27:00
Posts: 36
|
|
Hello
Ok, thank you. I thought just because it matches my 2 Spirit Fbl.
Gesendet von meinem GT-I9195 mit Tapatalk
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Sun 03. Sep 2017 22:33:30 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
You can always reassign the channels in the same way as you have it in your other profiles.
Then it will be same. In Jeti you can assign any channel to any function. So this could be confusing.
_________________
Spirit System developer
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 4 posts ] |
|
 |
Who is online |
 |
Users browsing this forum: No registered users and 4 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
