| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| [SOLVED] Taildragger inialazation https://www.spirit-system.com/phpBB3/viewtopic.php?f=35&t=2013 |
Page 1 of 1 |
| Author: | RidgeMan [ Fri 02. Jun 2017 22:02:13 ] |
| Post subject: | [SOLVED] Taildragger inialazation |
I noticed the note: Warning: If using these modes, be sure your model is initialized on a flat surface, not tilted to any side. Do not tilt the model for more than 5 seconds after initialization. It can be initialized in normal or inverted position. Does this mean that you would have to hold the tail on a taildragger level during power up? Or just keep the wings level? |
|
| Author: | ZeXx86 [ Sun 04. Jun 2017 12:59:30 ] |
| Post subject: | Re: Taildragger inialazation |
Such angle as are present in taildragger models is not a problem, but bigger could be. So just initialize the model in normal position and fly. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|