Version 1.1.0 was released!It brings many new features and improvements:
- Brand new Graupner HoTT integration:
- Full integration with HoTT radios without any limitations!
- Computer is not needed at all!
- Configuration anywhere and anytime directly in your radio.
- Works with a different Receiver protocols - PWM, PPM, SRXL/SUMD.
- Support for nearly all HoTT transmitters (all with display).
- Telemetry support out of the box.
- No need to update transmitter or receiver.
- Big thanks to Graupner and TomasN.
- For more info please check the HoTT integration guide [Heli guide].
- OpenTX Integration:
- Added full support for Telemetry - unit will provide own data.
- Vibrations visible as Fuel.
- Graupner SUMD protocol:
- Channel mapping was modified so that no assignment changes are needed from clean radio profile.
- Channel travel and reverses were modified so it will fit out of the box with clean radio profile.
- NOTE: Radios MX-12/MZ-12 will require to set Gyro Gain to Channel 7 in the Channels.
- Rescue and Stabilisation activated by a Separate channel:
- From now you can select which way you want to activate Rescue or Stabilisation modes.
- You can select any available channel for activation.
- New special function "F: Stabi function" was added for this purpose.
- Very easy configuration described in our Guide, including old way.
- Old way (by Negative gyro gain) is without any change.
- Rescue mode:
- New parameter Rescue throttle that can over take throttle control upon Rescue activation (0% is disabled).
- Vibration Analysis:
- Plots saved in the Vibration Analysis now contain Axis label and Vibration level.
- Improved Setup Wizard:
- Setup Wizard has more usefull hints for beginners.
- Links for manual and guides embedded in the software.
- New Servo List:
- New comprehensive Servo List [Heli] specially tailored for Spirit units.
- Any missing servo will be added to the list.
- Software enhancements:
- Connection stability with the Wifi-Link module was improved, especially during inactivity.
- Diagnostic tab is now displaying current mode more clearly - Head-Lock+Rescue, Head-Lock+Stabi., Normal, ..
- Diagnostic tab is now displaying Unassigned state for Banks when unused.
- When there is a problem during flashing, more helpfull instructions are provided.
- When configuration is not saved during Bank channel assignment during Bank Comparison, window is not displayed.
- Software can open http links in a Web browser.
- When firmware and software versions are not matching, more details are displayed.
- Wifi-Link module:
- Support for the latest 1.1.0 firmware.
- New parameter "P: Rescue throttle" for Real-Time tuning added.
- New function "F: Stabi function" for Real-Time tuning added.
- Diagnostic tab is now displaying current mode more clearly - Head-Lock+Rescue, Head-Lock+Stabi., Normal, ..
- Stability improvements in the Web UI.
- Wiki Pages:
- Front page of the Wiki was redesigned to get overall overview.
- Improved manual graphics style.
- New Wiki pages.
You do not have to change any settings after the update from previous version. Please verify special functions in the General/Channels (if assigned).
Graupner SUMD users will need to update their channel mapping, channel reverses and travel to default.
Update for the
Spirit units,
Wifi-Link and
OpenTX Integration is available in our
Download section.
