Spirit System
https://www.spirit-system.com/phpBB3/

Default Spirit II Defective From New, I Think
https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=5846		 Page 1 of 1
Author:  mcfast [ Mon 16. Oct 2023 16:43:16 ]
Post subject:  Default Spirit II Defective From New, I Think
Hi Guys

I got this Spirit II last year but it has never functioned right, I think? I just noticed it lately trying to do a setup on my gasser.
On my T-REX 500, I was able to cheat in the radio to get the 500 to fly, but not the greatest.

This is the problem that I have when I am in the recovery mode or setup wizard when I go to the limits page and adjust the pitch range, I can adjust all the pitch range I need and more, but once I'm unplugged for the PC and reboot the unit the pitch never goes past 5°no matter what I do, pitch curve 100%, servo endpoints 100% the only way I can get a bit of more pitch is to go past, 100% in the endpoints, I am getting up to about 7°, not enough, it was all right for the 500 but not enough for the gasser.

PS I also have a Spirit GT on my Goblin and it works perfectly happy with it, very happy!
Author:  Mattes61 [ Mon 16. Oct 2023 17:27:35 ]
Post subject:  Re: Default Spirit II Defective From New, I Think
Hello,
for help you must give a bit more detailed information -
What receiver, what transmitter, what protocoll etc.
Make some pictures from your setup in the spirit settings and/or crate a .4ds settings file of your configuration in the FBL.
Post the file here in the forum (attachment) -

Another question why have you not informed the costumer support that your FBL is not working correctly ? Why have you waited so long to do something about it?

Regards
Author:  mcfast [ Mon 16. Oct 2023 23:04:10 ]
Post subject:  Re: Default Spirit II Defective From New, I Think
Receiver, Futaba R2008SB, Transmitter Futaba T14SG on 2.4 S-FHSS using S-Bus

"why have you not informed the costumer support that your FBL is not working correctly"
I had it on a T-Rex 500 and by cheating in the radio I got it to fly OK not great, I really noticed a problem when I wanted to set up my Gasser helicopter, that's when I saw the problem just lately, need more than five to seven degrees on the main blades to fly good, I all so have a Spirit GT on a Goblin 700 all most the same setup it is perfect!

Attachments:
spirit-log-2023-10-03-114340.pdf [59.21 KiB]
Downloaded 137 times
Author:  ZeXx86 [ Tue 17. Oct 2023 7:12:51 ]
Post subject:  Re: Default Spirit II Defective From New, I Think
Hello,

please share your Spirit Settings file (4ds from Backup tab)
You shared only PDF log. The problem will be related just to the settings.
Author:  mcfast [ Thu 19. Oct 2023 20:41:07 ]
Post subject:  Re: Default Spirit II Defective From New, I Think
Hello again, I put all the files I could find in the spirit file installed on my PC. Now how do I send them to you?
Do you have a current email address that I can use to send the file?

Thanks in advance
John McDonald
Author:  Mattes61 [ Fri 20. Oct 2023 20:20:24 ]
Post subject:  Re: Default Spirit II Defective From New, I Think
Hello,
save your settingsfile out of the Spirit Settings Program as you see here:
Attachment:
Screenshot 2023-10-20 211446.png
Screenshot 2023-10-20 211446.png [ 45.22 KiB | Viewed 1853 times ]

then load it up here in the forum as attachment:
Attachment:
Screenshot 2023-10-20 211954.png
Screenshot 2023-10-20 211954.png [ 49.14 KiB | Viewed 1853 times ]


Regards
Author:  mcfast [ Sat 21. Oct 2023 22:10:43 ]
Post subject:  Re: Default Spirit II Defective From New, I Think
I am really not good with this PC stuff, I tried to download the files and I can't do it, if someone wants to do a screen share setup, give me a time and date and I'll set everything up, maybe we can get the information you need that way, if not, I will send the unit in, to Spirit to get a look at, I will pay the shipping it is better then a non-functioning unit.

Thanks John
Author:  Mattes61 [ Mon 23. Oct 2023 17:14:26 ]
Post subject:  Re: Default Spirit II Defective From New, I Think
Hello that's not rocket science, look at this:
Follow these steps:
Click on save
Attachment:
Screenshot 2023-10-23 175627.png
Screenshot 2023-10-23 175627.png [ 44.08 KiB | Viewed 1823 times ]

Enter a name
Attachment:
Screenshot 2023-10-23 180534.png
Screenshot 2023-10-23 180534.png [ 125.56 KiB | Viewed 1823 times ]

Click on save
Attachment:
Screenshot 2023-10-23 175843.png
Screenshot 2023-10-23 175843.png [ 117.17 KiB | Viewed 1823 times ]

Now in this folder is the file, here in my example C:\Program Files (x86)\Spirit Settings

That's all !
Author:  mcfast [ Thu 26. Oct 2023 12:19:57 ]
Post subject:  Re: Default Spirit II Defective From New, I Think
All is good, it was the setup, me bad.
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/