| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Logic Output to Ch0 or AUX not working https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=5721 |
Page 1 of 1 |
| Author: | DaKi [ Sun 18. Jun 2023 10:34:46 ] | ||
| Post subject: | Logic Output to Ch0 or AUX not working | ||
Hi! I have an issue where I can't switch on/off the Ch0 Output with Channel 8 of the radio. I'm using a Spirit GTR with a Jeti DS12. In the Receiver Output window the state is always 'ON', no matter if I set max negative to -150% or not. It never changes to 'OFF'....(See Screenshot) Also, if I measure the output voltage on Ch0 it is at 1.25V and 2V respectively, which is also somehow weird. Did anyone ever had such an issue? Thanks!
|
|||
| Author: | ZeXx86 [ Wed 21. Jun 2023 5:45:36 ] |
| Post subject: | Re: Logic Output to Ch0 or AUX not working |
Hello, have you tried connecting servo at the Output? It is not outputting analogue voltage signal, but PWM signal with channel value. So there is no On or Off. |
|
| Author: | DaKi [ Tue 11. Jul 2023 20:06:20 ] |
| Post subject: | Re: Logic Output to Ch0 or AUX not working |
Thanks for clarifying this! Yes, PWM is at the output. I had it in my mind, because the Jeti receivers have this function. So, I then misinterpreted the options.... Do you think that this feature could be implemented? Thank you! |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|