| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Governor Activation Issues https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=5052 |
Page 1 of 1 |
| Author: | krm97 [ Mon 10. Jan 2022 1:12:04 ] |
| Post subject: | Governor Activation Issues |
I had a Castle Edge 160 ESC on my Goblin Raw in which the governor worked flawlessly. I did not use the Spirit GT governor. I recently switched to a Hobbywing 130A HV ESC and tried using the Spirit Governor. The Spirit Governor will not activate because it wants a throttle reading above 50%. This is very unfortunate because at 42% throttle reading my RPM's are 2000rpm. Why would you ever set the governor activation at 50%?????????????????? It has nothing to do with the RPM readings on the heli. It might be somewhat predictive of RPM's but not a very accurate indicator. Can you fix this issue????? All the best, Ken |
|
| Author: | HeliMLM [ Mon 10. Jan 2022 8:20:14 ] |
| Post subject: | Re: Governor Activation Issues |
Hi if you configure the Spirit Gov, you will i.e. set your max. Headspeed value to i.e. 2.500rpms.... then 50% will be only 1.250rpms (it is always the percentage of the Max.Headspeed parameter then). what headspeeds do you like to configure? |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|