| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Spirit 2 with DS12 Jeti- Connection Failure and signal loses https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=4287 |
Page 1 of 1 |
| Author: | schmeckm [ Sat 19. Sep 2020 16:25:57 ] |
| Post subject: | Spirit 2 with DS12 Jeti- Connection Failure and signal loses |
Hi ALL Today I wanted to do my maiden flight with new Goblin 570, but i have the situation that after connecting the battery that the FBL lost connection to my DS 12. I was able after the FBL Initialization to move all Sender Sticks and all Gryo and Stick movements (Pitch, Nick, etc) works fine, but after a while (1-2 min) the Heli goes like into Fail safe mode although I have full battery and a full signal. After that I can not control anymore my Heli, but my servos have full power of battery. Fortunately It was good that I was on the ground and not in the air. After that I disconnected the battery and connected the battery again and it was working fine. I did the 3th time but the same result, no movement nothing anymore possible. What is also strange if I connect my computer with the FBL and control the settings, sometime I'm also losing at the sudden the connections. If this is occurred I have to close the software, open the software again and connect the Heli with the battery again. What is also strange, normally if I connect my DS-12 with my other Goblins (389,700) which I have a Bavaria Demon FBL and a external JETI Receiver I get the sound back" Reveiver connected". I get not that sound after the connecting with Sprit FBL 2 Has some one faced this similar issue? BR, Markus |
|
| Author: | ZeXx86 [ Sat 19. Sep 2020 16:59:04 ] |
| Post subject: | Re: Spirit 2 with DS12 Jeti- Connection Failure and signal l |
Hello, probably you have something connected at the E2 port - telemetry sensor? This is wrong with Spirit RS. This could cause such issue. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|