I got telemetry working with my uSpirit, HW 25A V4, and Spektrum DX9. On my TX’s ESC menu I can rpm, voltage, output. All that stuff.
But there is one feature lacking. The data does not show up on the RPM or Volts telemetry screen if I choose to enable them from the DX9’s telemetry settings.
Can this feature be added?
Other than being able to view them largely on a separate screen, the DX9 has the ability to verbally speak what the rpm/voltage values are. From the main menu of my DX9, there is a menu called Custom Voice Setup. From there I can have my DX9 announce volts or rpm if I flick a switch.
But my DX9 does not recognize any data for these fields. They may be trying to pull the data from the dedicated telemetry rpm and Volts fields.
Does that make any sense? The RPM/voltage telemetry data from the uSpirit is only going to the ESC telemetry menu of my DX9, but they do not expose themselves to the more versatile “RPM” or “Volts” telemetry data within DX9.
Hope I’m clear... sort of hard to explain.
Sent from my iPhone using Tapatalk
