| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Possible bug with rescue aspect to RTH: loss of altitude https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=3234 |
Page 1 of 1 |
| Author: | rhodesengr [ Mon 25. Mar 2019 0:21:37 ] |
| Post subject: | Possible bug with rescue aspect to RTH: loss of altitude |
I believe I have found a bug in the manner in which Rescue operates with RTH. I have Rescue on Aux2 and RTH on Aux3. I have Stabi set to Acro and I have 1.2 seconds of delay before it goes upright. If I am inverted and activate Rescue via Aux2, everything works fine. The model will level out inverted and the switch to upright in 1.2 seconds. I have some collective added and the model never goes downwards. However, if I am inverted and activate RTH via Aux3, RTH starts to function but there is a large drop in altitude when the upright-delay times out and the heli switches from inverted to upright. The negative collective persists through and after the transition to upright. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|