Hi,

One small thing. If you click for example on the left tail endpoint adjusting slider it would be logical if then it would move the tail slider to it, but it only does if you raise or lower it one point. A little bit weird if youre checking your endpoints.

_________________
[b]-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro

The best thing is you click on the slider to activate the "focus" and then use the keyboard arrow keys to change the values.

This has the advantage of allowing you to set your endpoints while looking at the tail, no need to operate a mouse or look at the screen, just two fingers on the arrows.

To have the slider move to see current limit when you start, just quickly do right/left arrow, so the value is unchanged and the slider moves.

And you can use TAB to move from the left to the right limit, and SHIFT+TAB to move back.

Same principle applies of course to the Servo tab Subtrim feature.

_________________
Oxy 2 ♦ X-Vert ♦ Warp 360 ♦ Blade 450X ♦ Blade 450X Nightflyer ♦ Goblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQX ♦ LadyMQX ♦ nano QX ♦ nano QX FPV ♦ Inductrix ♦ DX8 G1

Yes, however I would expect it to move to the endpoints when the slider is focussed

_________________
[b]-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro

+1
The way it currently does nothing until it is moved is just weird.

It would be a very easy fix in the software.

Sent from my SM-J320FN using Tapatalk

That is nice idea. It could be done with clicking.
With focus only it would be very risky, because if you configuring new model and you are just looking at it it could unexpectedly hit mechanical limit and cause possibly some damage.
So only when there is real intention to do something with limits it should move. Clicking (without a value change) should be good.

It will be in the next update.

_________________
Spirit System developer

Awesome! Thank you.

This doesn't appear to be in the latest release.