| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Spirit mode via telemetry https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=3079 |
Page 1 of 1 |
| Author: | Tom555 [ Fri 04. Jan 2019 14:22:43 ] |
| Post subject: | Spirit mode via telemetry |
Hi, what would be great is the actual active Sprit mode transmitted via telemetry, e.g. via an integer: 0) unclear 1) normal flybarless mode 2) Stabi Rescue N 3) Stabi Rescue Acro 4) Stabi Koax 5) Etc. 20) RTH 21) Etc. If more than one mode is active at the same time this may be also provided as a "combined" number, e.g. Stabi Koax and RTH -> 420 And so on. I use an opentx Frsky radio where I created a LUA script that shows me the enabled Spirit mode but this is derived from the switch positions in the radio. It would be much cleaner if the activated mode would be directly provided from the Spirit unit itself. Thanks and Regards Tom555 |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|