Hi,

what would be great is the actual active Sprit mode transmitted via telemetry, e.g. via an integer:
0) unclear
1) normal flybarless mode
2) Stabi Rescue N
3) Stabi Rescue Acro
4) Stabi Koax
5) Etc.

20) RTH
21) Etc.

If more than one mode is active at the same time this may be also provided as a "combined" number, e.g.
Stabi Koax and RTH -> 420
And so on.

I use an opentx Frsky radio where I created a LUA script that shows me the enabled Spirit mode but this is derived from the
switch positions in the radio. It would be much cleaner if the activated mode would be directly provided from the Spirit unit itself.

Thanks and
Regards
Tom555