| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Telemetry Jive with Fasstest - not all values transmitted https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=2949 |
Page 1 of 1 |
| Author: | augur [ Sat 03. Nov 2018 18:56:43 ] |
| Post subject: | Telemetry Jive with Fasstest - not all values transmitted |
Hi. I have the problem that not all displays of the Kontronik-Sensor are filled. E.g. BEC Voltage is emtpy and PWM is fixed to 119%. As I am using an old Jive and the Sensor is set to slot 8 as described in the manual. My transmitter is a T14SG with firmware V8. Any ideas what could cause this behaviour? Cheers, Nils |
|
| Author: | augur [ Sat 03. Nov 2018 21:07:10 ] |
| Post subject: | Telemetry Jive with Fasstest - not all values transmitted |
Ah, answered some questions myself with second read of this wiki article. http://manual.spirit-system.com/index.p ... _Telemetry Would be nice to output all of the ESC sensor data and add a second sensor for vibration level and PWM. Personally I like to know BEC current to have an eye on the usage of the BEC and if it still has enough power to support the Servos. And BEC Voltage is missing (but measured well by receiver). Cheers Nils |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|