| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| receiver redundancy for Frsky sbus receivers https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=2809 |
Page 1 of 1 |
| Author: | ckleanth [ Thu 06. Sep 2018 16:53:48 ] |
| Post subject: | receiver redundancy for Frsky sbus receivers |
Hi, I come from a fixed wing background and I use rx redundancy in almost all my models primarily using the RB-10 and now the RB-20. I treat as primary receiver a full range sbus capable receiver with sbus and telemetry capability (traditionally I tend to use X8R/X6R) and use an XM+ as a secondary receiver that has no telemetry output apart form rssi. Now I could take the same apparatus (X6R & XM+ & RB-10) take the cases off and fit it on my Trex 450 but its still a bit bulky. However since I bought a spirit pro, that has the two side inputs for the spectrum satellite receivers, I was wondering whether it be possible to add the functionality in the firmware and allow people using sbus protocol to plug a second receiver with no telemetry capability onto the secondary input port? Cheers |
|
| Author: | ZeXx86 [ Fri 07. Sep 2018 21:24:20 ] |
| Post subject: | Re: receiver redundancy for Frsky sbus receivers |
Hi, I am afraid this would be not possible. There are at least two technical issues that will not allow this. For T-Rex 450 or bigger models it is generally fine to use X4R-SB or similar receiver. But yes, redundancy is always better. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|