| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Lost Model Alarm (LMA) https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=2262 |
Page 1 of 2 |
| Author: | jjuk [ Tue 10. Oct 2017 22:16:37 ] |
| Post subject: | Lost Model Alarm (LMA) |
Please design, manufacture and sell a really loud LMA that can be triggered from an unused channel. Or from a selected spare channel if using sbus. Sell for about $10 Thanks. |
|
| Author: | Coco66 [ Wed 11. Oct 2017 21:50:29 ] |
| Post subject: | Re: Lost Model Alarm (LMA) |
This works fantastic at USD 7.99 http://www.lostmodelalarm.com |
|
| Author: | pachy [ Thu 12. Oct 2017 5:52:20 ] |
| Post subject: | Lost Model Alarm (LMA) |
Coco66 wrote: This works fantastic at USD 7.99 http://www.lostmodelalarm.com Thanks for this link ! Just we need the Spirit can have one more channel, like the spirit pro... |
|
| Author: | jjuk [ Sat 14. Oct 2017 22:18:25 ] |
| Post subject: | Re: Lost Model Alarm (LMA) |
$14 delivery! |
|
| Author: | jjuk [ Sun 22. Oct 2017 16:29:21 ] |
| Post subject: | Re: Lost Model Alarm (LMA) |
Is it possible to pass though a sbus channel signal to a spare servo port on the spirit ? I can then connect that channel to a buzzer. |
|
| Author: | ZeXx86 [ Mon 23. Oct 2017 7:05:47 ] |
| Post subject: | Re: Lost Model Alarm (LMA) |
Hello. Yes, with Spirit Pro it is possible - F: Output to CH0 But usually you can do so also with a Futaba receiver. If it is 4 channel receiver, you can program it to output higher set of channels instead of channels 1, 2, 3.. |
|
| Author: | jjuk [ Thu 26. Oct 2017 18:46:47 ] |
| Post subject: | Re: Lost Model Alarm (LMA) |
I don't have the pro, I have 2x red spirits. Is it possible with these? |
|
| Author: | ZeXx86 [ Thu 26. Oct 2017 20:33:48 ] |
| Post subject: | Re: Lost Model Alarm (LMA) |
With non-Pro you have to use a receiver with a free receiver port. |
|
| Author: | jjuk [ Thu 26. Oct 2017 20:46:08 ] |
| Post subject: | Re: Lost Model Alarm (LMA) |
Can't. Using FrSky xsr |
|
| Author: | Coco66 [ Thu 26. Oct 2017 21:08:36 ] |
| Post subject: | Re: Lost Model Alarm (LMA) |
Guys, for the passive one you don't need a dedicated channel. Use a Y with any servo, say, rudder, and the thingy will start shouting after one minute without a change in the signal or signal loss. Very practical. |
|
| Page 1 of 2 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|