| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Spirit Profile Beta error https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=1792 |
Page 1 of 1 |
| Author: | Coco66 [ Wed 18. Jan 2017 0:01:50 ] |
| Post subject: | Spirit Profile Beta error |
Current Spirit Profile Beta prints "Servos ‐> Subtrim ‐> Pitch (CH1)" value of "66" while the value is actually "-66" in software "Spirit Settings v2.2.0". Used to work fine at least until 19-DEC. |
|
| Author: | ZeXx86 [ Wed 18. Jan 2017 21:12:21 ] |
| Post subject: | Re: Spirit Profile Beta error |
Thank you for the message. We will check it. The software (Spirit Settings) is doing a special reversing depending on the servo reverses, but in case of the viewer it is displaying a raw values (unmodified). |
|
| Author: | Coco66 [ Wed 18. Jan 2017 21:29:37 ] |
| Post subject: | Re: Spirit Profile Beta error |
http://4dsviewer.spirit-system.com/www/ ... ?_fid=cq8w http://4dsviewer.spirit-system.com/www/ ... ?_fid=wdui For both files, Spirit Software actually shows -66, while the 4dsviewer shows -66 in the first (older) and 66 in the second (newer). Nothing actually changed in my setup, as far as I know... I went through the setup to redo the servo adjustments after replacing a broken link but in the end I ended up with the same -66 value of adjustment. |
|
| Author: | ZeXx86 [ Wed 18. Jan 2017 21:38:01 ] |
| Post subject: | Re: Spirit Profile Beta error |
Thank you very much. This is really interesting. I will move the thread to the Wishlist / Bug report section. |
|
| Author: | Coco66 [ Wed 18. Jan 2017 21:56:50 ] |
| Post subject: | Re: Spirit Profile Beta error |
I forgot to say that it's probably not a problem of the viewer, since both files are now viewed with the same version of viewer... |
|
| Author: | ZeXx86 [ Wed 18. Jan 2017 22:00:52 ] |
| Post subject: | Re: Spirit Profile Beta error |
We will verify it tommorow and let you know. It might be related with profile loading/saving. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|