Spirit System
https://www.spirit-system.com/phpBB3/

Visibility of 'Vibes' in DataExplorer
https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=1508		 Page 1 of 1
Author:  beko [ Fri 24. Jun 2016 20:18:39 ]
Post subject:  Visibility of 'Vibes' in DataExplorer
Hello,

I like to log Flightdata in my DS-14 and visualize/save it afterwords with 'DataExplorer'.
But I missed a Graph for the 'Vibes'-Parameter, that the Spirit offers. Looking in the
Logfile with an Editor, it shows a 'Vibes'-Entry in the Header also as continous 'Vibes'
Values in the log.
I figured out, when I add a Line (red marked in Pic. 1) manually in the Header
Attachment:
DS-14_log.jpg
DS-14_log.jpg [ 97.77 KiB | Viewed 2442 times ]

(like the one from Unilog2), DataExplorer will offer the possibility to show the 'Vibes'
Graph (gray in Pic. 2).
Attachment:
DataExpl.jpg
DataExpl.jpg [ 321.66 KiB | Viewed 2442 times ]

Is it possible to change the Jeti .bin-file in a way, that the Log File will include the
Line that i manually added? Or am I completely wrong??

Greetings from Germany

Bernd
Author:  ZeXx86 [ Fri 24. Jun 2016 20:30:31 ]
Post subject:  Re: Visibility of 'Vibes' in DataExplorer
You have to refresh Telemetry data in the transmitter.
When updating from 1.1.0 to newer versions, this issue can happen.
Deleting Vibes and refreshing the data will fix the problem.
Author:  beko [ Fri 24. Jun 2016 22:24:20 ]
Post subject:  Re: Visibility of 'Vibes' in DataExplorer
Hi ZeXx86,

thank you for your quick reply, I (once more) did a Telemetry/Sensor-refresh but in the Jeti-log
(attached) I just generated, the red-marked line from first picture still not appeares. The Vibes-
Sensor was also visible in Tx before, I put the Value on Telemetrie-Display. Perhaps it is an Issue
of DataExplorer?

Greetings from Germany

Bernd

Attachment:
23-07-47.log [46.64 KiB]
Downloaded 177 times


Edit: I use FW 2.02 in Spirit
Author:  beko [ Mon 27. Jun 2016 13:43:22 ]
Post subject:  Re: Visibility of 'Vibes' in DataExplorer
... updated from 2.02 EX to 2.02, took the new spirit.bin and
refreshed Telemetry/Sensors in my DS-14 (V4.0). Still no change,
the red marked Line must be added manually to see the Vibes-
Parameter in DataExplorer.
Is there anything I can try out ?? I am helpless ...

Greets Bernd
Author:  ZeXx86 [ Mon 27. Jun 2016 14:42:29 ]
Post subject:  Re: Visibility of 'Vibes' in DataExplorer
Hello,

now I understand your problem. It looks like DataExplorer is not able to determine data from the log, because there is missing parameter with ID 0 from unit.
Adding empty parameter with ID 0 will solve this.

Well, this could be fixed in the DataExplorer but also in our firmware. From my point of view it should be fixed rather in DataExplorer, but I guess this can take a long time.
We will fix it with upcoming version. Then all will be OK.

In the transmitter log viewer there is no problem, so you can view it without modification.
Author:  buell47 [ Mon 27. Jun 2016 15:46:02 ]
Post subject:  Re: Visibility of 'Vibes' in DataExplorer
ZeXx86 wrote:
Well, this could be fixed in the DataExplorer but also in our firmware. From my point of view it should be fixed rather in DataExplorer, but I guess this can take a long time.
We will fix it with upcoming version. Then all will be OK.


Fantastic, thx Tomas
Author:  beko [ Mon 27. Jun 2016 16:29:56 ]
Post subject:  Re: Visibility of 'Vibes' in DataExplorer
Tomas, thank you very much!!

Greets Bernd
Author:  beko [ Mon 06. Dec 2021 0:27:02 ]
Post subject:  Re: Visibility of 'Vibes' in DataExplorer
ZeXx86 wrote:
Hello,

now I understand your problem. It looks like DataExplorer is not able to determine data from the log, because there is missing parameter with ID 0 from unit.
Adding empty parameter with ID 0 will solve this.

Well, this could be fixed in the DataExplorer but also in our firmware. From my point of view it should be fixed rather in DataExplorer, but I guess this can take a long time.
We will fix it with upcoming version. Then all will be OK.

In the transmitter log viewer there is no problem, so you can view it without modification.


Hello Tomas,
for the last 5 Years I edit the logfiles to see the Vibes-Graph in Data-Explorer. Do you see the possibility to fix it in one of the next Versions of the Spirit Integration-file? This would be great!

Greetings from Germany

Bernd
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/