Spirit System
https://www.spirit-system.com/phpBB3/

spirit airplane firmware
https://www.spirit-system.com/phpBB3/viewtopic.php?f=21&t=873		 Page 1 of 2
Author:  djhandz [ Tue 08. Sep 2015 16:54:06 ]
Post subject:  spirit airplane firmware
Can we get a rough eta on when the airplane firmware will be coming out i have a spare spirit unit i would like to use in a fms p51 1400. Just wondering weather to buy a guardian or hold out till this airplane firmware comes thanks
Author:  ZeXx86 [ Tue 08. Sep 2015 18:43:07 ]
Post subject:  Re: spirit airplane firmware
It should be available just in few days for beta testing for those that want to participate in our program.
Altough it is fully working and we are very satisfied right now.
Author:  uragano47812 [ Mon 21. Sep 2015 14:04:43 ]
Post subject:  Re: spirit airplane firmware
ZeXx86 wrote:
It should be available just in few days for beta testing for those that want to participate in our program.
Altough it is fully working and we are very satisfied right now.


Any news on the new coming Spirit Aero? I fly also planes mid size to gas 50cc size and i'm really curious to see it and to know it's feature.

I see that Spirit Pro is the way to go for planes with 2 wing servos and two elev servos right?

Can you tell us more about the current features in beta firmware and what is in development for the stable firmware?

Thanks
Author:  djhandz [ Mon 21. Sep 2015 16:51:58 ]
Post subject:  Re: spirit airplane firmware
Waiting patiently myself for this. Give us some news tomas please
Author:  ZeXx86 [ Mon 21. Sep 2015 19:02:32 ]
Post subject:  Re: spirit airplane firmware
We are very busy with finishing version 1.3, but then we can immediately focus on the Aero.

It will be possible to use even smaller unit for dual aileron and dual elevator setup at the same time with single line receivers.
Beta will be available very soon for testing for interested people.

We are very satisfied with the progress.
Author:  7kyf0x [ Tue 17. May 2016 10:41:59 ]
Post subject:  Re: spirit airplane firmware
The best would be for Jeti-Users if you just pass the signals from the receiver through the spirit unit and modify the signals on the EX-Bus. What I mean is: You just use EX-Bus from the Receiver to the Spirit-Unit modify the signals and pass them to a CB200/400 using EX-Bus again.
This way you can use as much servos as you like or need for your different needs. Would be great if you have full integration of the spirit and the Jeti CB-System in the same time. This is what I am dreaming for :roll:
This is what the Assist from Jeti should be in the future but they don´t finish that product.
So go for it Spirit ;)

But if you think about it a little more there is a problem again.
You can use to satellites directly connected to a CB-System. So why not connect to satellites to the Spirit?

And next step is to integrate telemetry, in this case speed, for gain adjustments. The higher the speed the lower the gains...
And so on and so on...
Author:  helibabou [ Wed 26. Oct 2016 4:05:08 ]
Post subject:  Re: spirit airplane firmware
Any news regarding the availablity of the Spririt Aero.
It woulld be very nice to use the Spirit Pro on Airplane.
Author:  ZeXx86 [ Thu 27. Oct 2016 7:02:29 ]
Post subject:  Re: spirit airplane firmware
Yes, it will be available in the following weeks, but you can already use Spirit Pro with Aero.
Everything is nearly prepared :)

Thank you for the interest!
Author:  tzirancamaro [ Mon 31. Oct 2016 18:48:03 ]
Post subject:  Re: spirit airplane firmware
Good morning,
could you please tell me how I can use my pro spirit in areo mode?
I would also like to know where I can get the aero program?
Thank you very much
Joseph
Author:  tzirancamaro [ Wed 14. Dec 2016 20:21:34 ]
Post subject:  Re: spirit airplane firmware
I would appreciate your letting me know the progress in the aero program and its likely release date, because I would like to equip my airplanes with your flight controller for next season.
Thank you very much
Page 1 of 2 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/