| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Tail ESC possible? https://www.spirit-system.com/phpBB3/viewtopic.php?f=21&t=745 |
Page 1 of 1 |
| Author: | ajadda [ Mon 15. Jun 2015 19:30:51 ] |
| Post subject: | Tail ESC possible? |
Hi, I wonder if it was possible to use a tail ESC instead of a tail servo. If so, what should I take care of? Regards, Alexander |
|
| Author: | ZeXx86 [ Mon 15. Jun 2015 21:19:29 ] |
| Post subject: | Re: Tail ESC possible? |
What do you mean by Tail ESC? Do you want to connect ESC to the CH4 port? What is the reason for this? |
|
| Author: | ajadda [ Mon 15. Jun 2015 22:04:50 ] |
| Post subject: | Re: Tail ESC possible? |
Yes, that is what I was thinking about. I have a small heli with a tail-motor driven by a separate ESC. |
|
| Author: | ZeXx86 [ Mon 15. Jun 2015 22:33:02 ] |
| Post subject: | Re: Tail ESC possible? |
Yes, it is possible. But the tuning will be little bit different than with normal servo. |
|
| Author: | ajadda [ Mon 15. Jun 2015 22:45:09 ] |
| Post subject: | Re: Tail ESC possible? |
Thank you for the information! I am sure there will be differences compared to a servo, a motor is much slower in any reaction, there are not really rudder endpoints... Should I use slowest frequency for the ESC? |
|
| Author: | ZeXx86 [ Mon 15. Jun 2015 22:56:56 ] |
| Post subject: | Re: Tail ESC possible? |
60 Hz should be fine. You can use rudder endpoints to set throttle range for the ESC. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|