Hello,
I have an OMP M2 V2 with an uSpirit. Using the orig. ESC for main and tail rotor.
After setup everything looks fine and stable. Hovering is very smooth and only very soft pedulum on the tail (left and right). After the first loop or flip the M2 starts to be very unstable on the elevator axis. I tried several different settings for the sensor. At the end I was at the lowest level of 20% but it still wobbles on elevator axis. After landing and starting again (without restarting uSpirit) it stopped wobbling till the first loop or flip.

Any hints what I could do?

Kind regards

Michael

Got it solved.