Spirit System
https://www.spirit-system.com/phpBB3/

OpenTX LUA-Script shows no values
https://www.spirit-system.com/phpBB3/viewtopic.php?f=21&t=4807		 Page 1 of 1
Author:  Hermi [ Sat 31. Jul 2021 21:04:45 ]
Post subject:  OpenTX LUA-Script shows no values
Hi, everyone,

I connected my Spirit II to my FrSky X8R as shown in OpenTX Integration.
A 1to1 cable from X8R SBus to SII RUD. The short end of the FrSky Integration cable to the Smart Port of the X8R. The long end in SYS of the SII

Telemetry works fine.
But the LUA script basic.lua does not show any values. The parameters cannot be selected either.

Is something wrong connected or does the script and OpenTX 2.3.13 or Taranis X9lite not go together?
Author:  JoergZ [ Sat 31. Jul 2021 22:32:14 ]
Post subject:  Re: OpenTX LUA-Script shows no values
no integration cable necessary. Just standard 3 pin cable from SYS to SmartPort (+ can be disconnected)
Author:  Hermi [ Sun 01. Aug 2021 7:20:34 ]
Post subject:  Re: OpenTX LUA-Script shows no values
The instructions state that the integration cable is required for Spirit 2. Only the Spirit GT doesn't need one.
Does not matter. I tried it anyway.
The difference is that with the integration cable the progressbar goes through when changing pages and with the simple cable it does not change.
It looks as if the integration cable has some function.
Author:  Hermi [ Tue 03. Aug 2021 17:10:40 ]
Post subject:  Re: OpenTX LUA-Script shows no values
no other ideas?
Author:  ALFi [ Thu 05. Aug 2021 15:24:16 ]
Post subject:  Re: OpenTX LUA-Script shows no values
Hermi wrote:
Taranis X9lite


i think the lua scripts work only with radios that have a "full size" display.
the do not work on the one with the "low resolution" display.
with my x-lite pro it is also not working

read there i think it is on the todo list:
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4577&p=33940&hilit=lite#p33940
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/