Spirit System https://www.spirit-system.com/phpBB3/ |
|
GeoLink on a GOBLIN 500 Tailboom https://www.spirit-system.com/phpBB3/viewtopic.php?f=21&t=4703 |
Page 1 of 1 |
Author: | Dr.Fleming [ Fri 11. Jun 2021 17:22:59 ] |
Post subject: | GeoLink on a GOBLIN 500 Tailboom |
Has some experience mounting the GeoLink on a Tailboom from a Goblin 500, I know that Spirit sells a support, but I think it is to high and Ugley, I have looked at the GeoLink manual, and it says that through the software it can be digitally leveled, then because the support ! ?? By the way, I will try to mount it close to the FBL Unit unther the Canopy, but may they will not receive a good SAT Signal !? |
Author: | BenLeo [ Sun 13. Jun 2021 1:19:38 ] |
Post subject: | Re: GeoLink on a GOBLIN 500 Tailboom |
Try this: https://www.thingiverse.com/thing:3558583 |
Author: | gjhernandez [ Fri 18. Jun 2021 15:26:28 ] |
Post subject: | Re: GeoLink on a GOBLIN 500 Tailboom |
Yes, that will work just fine |
Author: | Ramber [ Sun 04. Jul 2021 21:24:54 ] |
Post subject: | Re: GeoLink on a GOBLIN 500 Tailboom |
Blade can strike a boom really hard, so Geolink flyes away with a bullet speed. 3M double tape woun't help at all! You'll never found it, even in a low grass. So, I made my own mount, and I made it really safe: https://www.thingiverse.com/thing:3953629 - this is for Goblin 380. If you like it - tell me and I'll send you Goblin 500 version. The last time I had a boomstrike, 3 of 2 nylon ties was broken, but the Geolink was safe! |
Author: | Luv2fly2 [ Tue 24. Aug 2021 14:09:23 ] |
Post subject: | Re: GeoLink on a GOBLIN 500 Tailboom |
Dr.Fleming wrote: Has some experience mounting the GeoLink on a Tailboom from a Goblin 500, I know that Spirit sells a support, but I think it is to high and Ugley, I have looked at the GeoLink manual, and it says that through the software it can be digitally leveled, then because the support ! ?? By the way, I will try to mount it close to the FBL Unit unther the Canopy, but may they will not receive a good SAT Signal !? On my 570 it is directly mounted on the boom and I didn't do a digital level and works GREAT. I also used the double sided tape and made the mount like the manual shows. |
Author: | Ramber [ Thu 04. Nov 2021 9:04:57 ] | ||||
Post subject: | Re: GeoLink on a GOBLIN 500 Tailboom | ||||
Last weekend I had a boomstrike on my Trex700. I think that canopy flew into the main rotor. It was great! A real blast in the air! My Geolink mount worked fine.
|
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |