| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| OpenTX Intergration please check this https://www.spirit-system.com/phpBB3/viewtopic.php?f=21&t=4678 |
Page 1 of 1 |
| Author: | MartyMcFly [ Thu 20. May 2021 7:52:57 ] |
| Post subject: | OpenTX Intergration please check this |
On the cable I use,I plug it into the s port on my frsky XR8 pro receiver,when I measure voltage comming out of s port it is 4.96v,when I measure voltage at red plug I am getting Zero voltage I presume that means the cable is faulty,many thank's for looking |
|
| Author: | ZeXx86 [ Mon 24. May 2021 21:15:30 ] |
| Post subject: | Re: OpenTX Intergration please check this |
Hello, at the other side there should be zero voltage, because cable has electronics inside. At both ends there are different outputs. Unless cable is wired improperly it should all work. Otherwise it could be damaged permanently. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|