Spirit System
https://www.spirit-system.com/phpBB3/

Jeti icm Spirit (not pro)
https://www.spirit-system.com/phpBB3/viewtopic.php?f=21&t=4271
Page 1 of 1

Author:  Hermor [ Fri 11. Sep 2020 14:42:35 ]
Post subject:  Jeti icm Spirit (not pro)

I received my new jeti-spirit ds12 today, really happy with it.

But i cant figure out, coming from frsky eacht sbus rx has 16ch over bus. What about jeti rx? dus is support 16ch over ex ppm?

And..is is possible to use spirit with only jeti ex sat?

gr Kees

Verstuurd vanaf mijn SM-A520F met Tapatalk

Author:  ZeXx86 [ Fri 11. Sep 2020 14:50:08 ]
Post subject:  Re: Jeti icm Spirit (not pro)

Hello,

our DS12 has 16 channels out of the box.

It can work with many protocols, but EX BUS is the best and allow full telemetry.

If you have Spirit RS you can connect to it with no additional receiver. It has everything included.
For other Spirit units you will need external receiver. Any JETI DUPLEX receiver will work. For example REX3 should be fine.

Author:  Hermor [ Fri 11. Sep 2020 15:00:14 ]
Post subject:  Re: Jeti icm Spirit (not pro)

Tnx, iam not familiar with jeti,

Does that mean the ppm signal line supports 16ch? and is it possible to control btw landing gear by one if the phisical servo outputs?





Verstuurd vanaf mijn SM-A520F met Tapatalk

Author:  ZeXx86 [ Mon 14. Sep 2020 7:23:52 ]
Post subject:  Re: Jeti icm Spirit (not pro)

Yes,

why you are interested in PPM? It is unused in the most cases.

You can connect landing gear also directly to the Spirit RS.

Author:  Hermor [ Mon 14. Sep 2020 7:32:15 ]
Post subject:  Re: Jeti icm Spirit (not pro)

Hoi,

i asked because i wanted for sure the REX series have 16ch over EX bus, Not specially the pmm is interesting me.

I ordered a REX3 and some REX7 lets see how it works.

tnx for helping!

Verstuurd vanaf mijn SM-A520F met Tapatalk

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/