| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| servos go crazy when saving banks https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=957 |
Page 1 of 2 |
| Author: | djhandz [ Wed 07. Oct 2015 21:37:58 ] |
| Post subject: | servos go crazy when saving banks |
Setting up spirit pro software/firmware 1.3.1 when making changes and saving banks the servos go crazy and i have to disconnect power any ideas scared of damaging my servos |
|
| Author: | ZeXx86 [ Thu 08. Oct 2015 7:18:57 ] |
| Post subject: | Re: servos go crazy when saving banks |
Hello, could you tell me, what is your receiver type and if it happen when you turn off the receiver? |
|
| Author: | djhandz [ Thu 08. Oct 2015 8:30:23 ] |
| Post subject: | Re: servos go crazy when saving banks |
I am using 2 dsmx sats wired direct to unit with a dx9 |
|
| Author: | ZeXx86 [ Thu 08. Oct 2015 8:51:53 ] |
| Post subject: | Re: servos go crazy when saving banks |
Great, then can you try if the problem is there when you start the unit without transmitter? |
|
| Author: | djhandz [ Thu 08. Oct 2015 9:06:13 ] |
| Post subject: | Re: servos go crazy when saving banks |
I will test without tx after work. Thanks. Thinking ahead without the tx on its not possible to set limits/pitch range would a work around be to setup with tx on set limits but then before i go to save the settings turn off the tx?? |
|
| Author: | Coco66 [ Thu 08. Oct 2015 9:09:34 ] |
| Post subject: | Re: servos go crazy when saving banks |
I think they want to see if the servos behave like that when not "bound". Maybe that's what happens while you are saving banks, some re-initialization happens that "suspends" the bind. Just speculating )))))) |
|
| Author: | elfew [ Thu 08. Oct 2015 12:57:00 ] |
| Post subject: | Re: servos go crazy when saving banks |
I can confirm that. I got this in 1.2 too, but I dont know how to reproduce it. Same configuration 2x dsmx sats. Servos just go crazy |
|
| Author: | djhandz [ Thu 08. Oct 2015 15:47:25 ] |
| Post subject: | Re: servos go crazy when saving banks |
Tested with tx off and no issues.. but how do i set limits and pitch with tx off ?? |
|
| Author: | ZeXx86 [ Thu 08. Oct 2015 16:00:45 ] |
| Post subject: | Re: servos go crazy when saving banks |
You can use your TX without any problem all the time. Does the issue happen each time? |
|
| Author: | djhandz [ Thu 08. Oct 2015 16:51:01 ] |
| Post subject: | Re: servos go crazy when saving banks |
Yes each time i go to save when the tx is on they go crazy |
|
| Page 1 of 2 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|