| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| 1.3.0 firmware file https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=924 |
Page 1 of 2 |
| Author: | Coco66 [ Wed 30. Sep 2015 22:34:07 ] |
| Post subject: | 1.3.0 firmware file |
File is .4df instead of .bin, roughly 120KB instead of around 50KB, and no published checksum... sure? |
|
| Author: | MyRCode [ Wed 30. Sep 2015 22:35:04 ] |
| Post subject: | Re: 1.3.0 firmware file |
I just flashed it... Going to the field right now. I'll let you know in about 20 minutes Sent from my XT1254 using Tapatalk |
|
| Author: | ZeXx86 [ Wed 30. Sep 2015 22:43:26 ] |
| Post subject: | Re: 1.3.0 firmware file |
Please check our release notes, you can find more details about the new firmware format here. |
|
| Author: | MyRCode [ Wed 30. Sep 2015 23:04:54 ] |
| Post subject: | Re: 1.3.0 firmware file |
It flies! Don't forget to re-enable your governor after the update.... And download the new software on your phone if you're using it Sent from my XT1254 using Tapatalk |
|
| Author: | Malc1 [ Thu 01. Oct 2015 14:52:54 ] |
| Post subject: | Re: 1.3.0 firmware file |
Just wondering, did you unplug all the cables from the unit before carrying out the update? |
|
| Author: | MyRCode [ Thu 01. Oct 2015 15:11:31 ] |
| Post subject: | Re: 1.3.0 firmware file |
Malc1 wrote: Just wondering, did you unplug all the cables from the unit before carrying out the update? Nope... Just plugged in the USB cable |
|
| Author: | Malc1 [ Thu 01. Oct 2015 16:39:34 ] |
| Post subject: | Re: 1.3.0 firmware file |
OK I have downloaded the file but am unable to update the unit as the firmware update software is only looking for a .bin file. There is no option to search for any other type. Windows XP. Any ideas? |
|
| Author: | ZeXx86 [ Thu 01. Oct 2015 16:41:32 ] |
| Post subject: | Re: 1.3.0 firmware file |
You have to download and install also the new software. Old software does not support new firmware format. |
|
| Author: | Malc1 [ Thu 01. Oct 2015 16:47:21 ] |
| Post subject: | Re: 1.3.0 firmware file |
OK will try this now. |
|
| Author: | Malc1 [ Thu 01. Oct 2015 17:14:15 ] |
| Post subject: | Re: 1.3.0 firmware file |
Updated successfully and Nitro governor set up again. On the bench the first thing I've noticed is that the throttle servo still goes over to full throttle but it no longer pulses continuously when it gets there. I'm using a Jeti DS16,do I need to update a file for this to work correctly? |
|
| Page 1 of 2 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|