| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Spektrum adaptor - Output Voltage? https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=815 |
Page 1 of 1 |
| Author: | Malc1 [ Sat 01. Aug 2015 13:28:28 ] |
| Post subject: | Spektrum adaptor - Output Voltage? |
Should the voltage coming out of the adaptor be exactally 3.3v? I have checked the one that I have extended the input cable on and my spare one and both are outputting 3.2v. Is this correct? Is this going to make any different to the governor sensor? |
|
| Author: | ZeXx86 [ Sat 01. Aug 2015 13:35:11 ] |
| Post subject: | Re: Spektrum adaptor - Output Voltage? |
It should be 3.3V or very close to it. Unfortunately not all multimeters are very precise, but even if there is 3.2V it is not a problem. |
|
| Author: | Malc1 [ Sat 01. Aug 2015 13:41:16 ] |
| Post subject: | Re: Spektrum adaptor - Output Voltage? |
Ok thanks. Both at 3.2v. I thought at first that lengthening the input to the PCB on the one had caused a slight voltage drop. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|