It is currently Sat 23. Nov 2024 0:02:54

All times are UTC + 1 hour





Post new topic Reply to topic  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sat 06. Jun 2015 14:43:23 
Offline

Joined: Thu 12. Feb 2015 13:36:21
Posts: 37
The manual states:
"Max. Head Speed
Configure max. head speed that should be achieved with 100% throttle curve.
For example: If you know that you won't exceed 2500 RPM then you can set
the value to 2500."


and then in 'Fine Tuning'...
"Firstly you have to finish basic setup including Max. Head Speed.
Throttle curve in the transmitter must be FLAT. We recommend to set the
throttle curve for example to flat 70%, 80% or 90%."


I've used VBAR external governor for years with great success and always used 100% throttle curves and banks with different headspeeds. If I want my headspeed to be 2000, I set max to 2000 and use 100% throttle curve.

The manual recommendations in 'Fine Tuning' on using 70,80 and 90% flat throttle curves suggests that using 100% curve is not optimal with the Spirit governor function?

I want the absolute best governor performance possible. My max headspeed is my target headspeed that I will use the most. I determined this using MrMel's headspeed calc and selecting external governor.

Assuming that my target headspeed is optimal for my gearing, blades, motor, packs, etc., is a 100% throttle curve a detriment in any way to performance?
*headroom for governor performance is built into my target headspeed.

Thanks,
Jay


Top
 Profile  
 
PostPosted: Sat 06. Jun 2015 16:40:52 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
It will work without any problem if there is headroom you have described.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sat 06. Jun 2015 18:23:52 
Offline

Joined: Thu 12. Feb 2015 13:36:21
Posts: 37
Thanks Zex!


Top
 Profile  
 
PostPosted: Sun 14. Jun 2015 14:38:03 
Offline

Joined: Thu 27. Nov 2014 12:37:27
Posts: 5
ZeXx86 wrote:
It will work without any problem if there is headroom you have described.

how can i know headroom and max hs?
i know max hs from n. of cells kv motor and gear ratio.
is this correct?
with this date i have eg 3000hs
max hs on spirit gov must be 3000 or the max hs i want run?
thanks


Top
 Profile  
 
PostPosted: Sun 14. Jun 2015 19:55:05 
Offline

Joined: Fri 26. Sep 2014 20:08:26
Posts: 86
Spirit will multiply your throttle curve with the max hs you input, so if 3000 is the absolute max your system can deliver then to create some headroom you will need to enter a lower max hs in Spirit or leave it at 3000 and reduce you throttle curve. Two ways to do it.

Sent from my SM-G920P using Tapatalk


Top
 Profile  
 
PostPosted: Mon 15. Jun 2015 8:15:31 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
It will work fine even if your Max. Head Speed is 3000 RPM and you will set 100% throttle curve.
Until head speed is not at the limit of your motor/helicopter (there is still headroom) then it will work fine.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 62 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .