Spirit System
https://www.spirit-system.com/phpBB3/

Bluetooth module where to plug in [SOLVED]
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=714
Page 1 of 1

Author:  Jamisonchang [ Wed 03. Jun 2015 3:45:24 ]
Post subject:  Bluetooth module where to plug in [SOLVED]

Hello,
I am interested in adding the bt module. I have two Dsmx satellites. My aux channel has
My esc with the red wire disconnected. The rudder channel has a y-cable with the bec lead and the adapter for the second satellite. Where can I plug in the bt module? I could do another y cable and plug my esc into one side and the bt signal lead into the other ( both plugged into aux) but where do I get power for the Bt module? Thanks

Author:  Jamisonchang [ Wed 03. Jun 2015 4:26:42 ]
Post subject:  Re: Bluetooth module where to plug in

My apologies. I made a mistake in my above post. The signal lead of the bt module would go into the sys port. Could I then plug the power lead of the bt module into a y connector (the other half has the esc plug with the red wire disconnected and both plug into the aux port of sprit ). Will that work? Thanks

Author:  ZeXx86 [ Wed 03. Jun 2015 7:26:14 ]
Post subject:  Re: Bluetooth module where to plug in

Yes, it will work.

Connection scheme is in my acttachment

Attachments:
btscheme.pdf [38.8 KiB]
Downloaded 193 times

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/