| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Porpoising during fff https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=668 |
Page 1 of 1 |
| Author: | Ktm250 [ Thu 14. May 2015 23:00:20 ] |
| Post subject: | Porpoising during fff |
I have been trying to tune my spirit unit in on my 250 and have noticed that during fast forward flight I get porpoising. Is there a setting in the spirit unit that could cause this. Could it be that my cyclic gain is to high? Thanks. |
|
| Author: | ZeXx86 [ Fri 15. May 2015 7:19:01 ] |
| Post subject: | Re: Porpoising during fff |
Yes, it could be the problem. Also do you have flybarless lades on the helicopter? |
|
| Author: | Ktm250 [ Tue 19. May 2015 13:28:48 ] |
| Post subject: | Re: Porpoising during fff |
I am assuming that they are. They are the original blades that came in the kit. It is a trex250 DFC Plus. |
|
| Author: | ZeXx86 [ Tue 19. May 2015 17:44:21 ] |
| Post subject: | Re: Porpoising during fff |
Great, make sure that frequency for the cyclic servos is not higher than 200Hz. Pithup Compensation in the Advanced tab can be configured to 0. You can start with Cyclic Gain value around 40-50%. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|