| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| How to assign Channel 0 on the spirit GTto a channel https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=6297 |
Page 1 of 1 |
| Author: | raceboy1 [ Sat 21. Dec 2024 21:05:45 ] |
| Post subject: | How to assign Channel 0 on the spirit GTto a channel |
I've got 4 Spirit GT's in use now for all of my Electric Heli's so I'm pretty familiar with the wiring However, I'm putting the GT on one of my Nitro models and I need a Remote Glow on a Switch Channel 0 is open, but I can't find a way to assign it to a Channel What am I missing |
|
| Author: | msromike [ Sun 22. Dec 2024 15:09:19 ] |
| Post subject: | Re: How to assign Channel 0 on the spirit GTto a channel |
raceboy1 wrote: I've got 4 Spirit GT's in use now for all of my Electric Heli's so I'm pretty familiar with the wiring However, I'm putting the GT on one of my Nitro models and I need a Remote Glow on a Switch Channel 0 is open, but I can't find a way to assign it to a Channel What am I missing Will assigning function "F: Output to CH0" to an unused receiver channel work for you? There are options for mapping receiver channels to CH0 and AUX2 in the "receiver channel mapping" tab. The only problem I have with the GT in this regard is it seems to be limited to 6 assignments. Depending on how many functions you already have setup, you may not be seeing the option to map CH0. You may have already used all of user defined function slots for other things. |
|
| Author: | raceboy1 [ Sun 22. Dec 2024 15:46:57 ] |
| Post subject: | Re: How to assign Channel 0 on the spirit GTto a channel |
Thanks, I total missed that. Found both the Channel O and Aux in the F function |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|