It is currently Tue 24. Dec 2024 2:35:38

All times are UTC + 1 hour





Post new topic Reply to topic  [ 11 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sun 08. Sep 2024 21:02:43 
Offline

Joined: Sun 08. Sep 2024 20:28:53
Posts: 7
Hello,
I recently bought a Radiomaster rp3-h elrs receiver to work with my spirit gt unit. I connected it through the crsf connection. When discovering telemetry sensors, i get to see the spirit sensors in edge tx, but al the values stay at 0. I do get working telemetry from the sensors of the rp3-h itself though. I run elrs via the Ranger micro in my tx16s on Edge tx v2.10.2. My elrs firmware on the tx and rx are 3.4.3. On the Spirit gt i run firmware 3.7.0.
I would really like to have working telemetry from the Spirit unit as well and cannot find out what the problem seems to be…


Top
 Profile  
 
PostPosted: Tue 10. Sep 2024 14:39:09 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12483
Hello,

we received this receiver today and will check how it works. I will let you know soon. We will make sure telemetry will work properly for upcoming update (likely next week).

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Tue 10. Sep 2024 19:19:27 
Offline

Joined: Sun 08. Jan 2023 14:32:43
Posts: 293
ZeXx86 wrote:
Hello,

we received this receiver today and will check how it works. I will let you know soon. We will make sure telemetry will work properly for upcoming update (likely next week).


zexx86 please in the next update you can increase the numbers of flight style?
4 is too sweet and the 5 it's too fast.
Mybe add the decimal 4,1/4,2 ecc so we don't change the setup of the others
thanks


Top
 Profile  
 
PostPosted: Wed 11. Sep 2024 7:10:58 
Offline
User avatar

Joined: Sun 09. Jun 2013 13:14:17
Posts: 1000
Location: Plzeň
franz88 wrote:
ZeXx86 wrote:
Hello,

we received this receiver today and will check how it works. I will let you know soon. We will make sure telemetry will work properly for upcoming update (likely next week).


zexx86 please in the next update you can increase the numbers of flight style?
4 is too sweet and the 5 it's too fast.
Mybe add the decimal 4,1/4,2 ecc so we don't change the setup of the others
thanks


I think this setting has been in SW for several years and I would not change it.
Use expo in your transmitter.
I see the difference between 4-5 as very, very small.

_________________
Spirit System (Spirit W1, RS & GTR & all the others)
Spirit Wave & JETI DS 12
http://www.habada.cz


Top
 Profile  
 
PostPosted: Wed 11. Sep 2024 7:40:06 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12483
franz88 wrote:
ZeXx86 wrote:
Hello,

we received this receiver today and will check how it works. I will let you know soon. We will make sure telemetry will work properly for upcoming update (likely next week).


zexx86 please in the next update you can increase the numbers of flight style?
4 is too sweet and the 5 it's too fast.
Mybe add the decimal 4,1/4,2 ecc so we don't change the setup of the others
thanks

Flight Style is not changing speed at all. The most pilots can't distinguish difference between 1 and 4. Can you describe what difference you can see or what you wish to achieve? Please do this in other thread, this thread is for different question.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 25. Sep 2024 2:02:07 
Offline

Joined: Wed 25. Sep 2024 1:57:01
Posts: 1
I'm having the same problem: Using a BetaFPV ERLS Lite receiver (had one on my desk for testing, plan was to switch to RP3-H ultimately) running ELRS 3.5.

The transmitter discovers the following sensors: RxBt, Curr, Capa, Bat%. But the values never update (and I get the "sensor lost" warning).

Is there anything I can help debugging?


Top
 Profile  
 
PostPosted: Thu 26. Sep 2024 5:43:08 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12483
Thank you for your report. Today we might finish required changes to make ELRS compatibility better.
We have the setup working with RP3-H now.
Anyone interested can write me a message to get faster access to the firmware update.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 27. Sep 2024 9:47:17 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12483
The problem seems to be resolved completely.

Additionally we will have CRSF/ELRS integration fully working soon too.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 30. Sep 2024 10:34:33 
Offline

Joined: Sun 08. Sep 2024 20:28:53
Posts: 7
Thats great news! Thank you for being so accessible to your customers! Looking forward to the integration too!


Top
 Profile  
 
PostPosted: Mon 28. Oct 2024 9:24:02 
Offline

Joined: Sun 08. Sep 2024 20:28:53
Posts: 7
Sadly flashing the spirit gt to 3.7.1 did nothing for my telemetry problem. Nothing changed. I've deleted all the sensors in the tx16s and re-discovered them. I get 3 sensors: esc amp, batt %, batt cap. But al values remain zero.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .