| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| GeoLink2 stop to work correctly https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=6261 |
Page 1 of 1 |
| Author: | Dr.Fleming [ Wed 20. Nov 2024 15:51:12 ] |
| Post subject: | GeoLink2 stop to work correctly |
My Maverick when I built it, all the GeoLink2 Features works, now after few months, my coming Home the Heli comes back in the correct direction, but not stops at the Home Point !??? Whats going on? The Position Hold is bad now, before works perfectly, also without touch it it in the Setup ? 
|
|
| Author: | ZeXx86 [ Thu 21. Nov 2024 8:33:42 ] |
| Post subject: | Re: GeoLink2 stop to work correctly |
Hello, problem could be in Compass calibration but rather in reprogramming Home point by mistake with assigned switch. Please check that Home point is really at the same spot. |
|
| Author: | Dr.Fleming [ Thu 21. Nov 2024 12:45:24 ] |
| Post subject: | Re: GeoLink2 stop to work correctly |
I checked on the Map, the only idea what I will do next, disable the Log, will see. ZeXx86 wrote: Hello,
problem could be in Compass calibration but rather in reprogramming Home point by mistake with assigned switch. Please check that Home point is really at the same spot. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|