| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| setup Wizard question https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=6245 |
Page 1 of 1 |
| Author: | Renzo [ Thu 31. Oct 2024 23:07:27 ] |
| Post subject: | setup Wizard question |
Hallo All, Do the 6 degrees have to be positive? in my setup Wizard I have -6 degrees is it right?thanks everyone for your help |
|
| Author: | ExCCHP [ Fri 01. Nov 2024 1:49:32 ] |
| Post subject: | Re: setup Wizard question |
Which blade are you using to take the angle measurement? Are the blades aligned with the boom? AFAIK you should always take measurements with the blade over the nose of the canopy. |
|
| Author: | HeliMLM [ Fri 01. Nov 2024 7:43:00 ] |
| Post subject: | Re: setup Wizard question |
it does not matter if you take the blade over the boom or over the nose. and depending on the pitch gauge you are using and how it was zeroed and which blade you are using, there could be + or - 6°. |
|
| Author: | Renzo [ Fri 01. Nov 2024 12:38:18 ] |
| Post subject: | Re: setup Wizard question |
Tank for your help...i can go fly:) |
|
| Author: | franz88 [ Fri 01. Nov 2024 13:17:51 ] |
| Post subject: | Re: setup Wizard question |
don't get confused It doesn't mean 6 degrees of cyclic 6 degrees in the geometry and in cyclic ring supported degrees from your mechanics helicopter (about 10 degrees) |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|