| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Electric tail rotor https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=6222 |
Page 1 of 1 |
| Author: | a20cae [ Wed 16. Oct 2024 6:06:05 ] |
| Post subject: | Electric tail rotor |
Hi does anyone know where I can find out the setup info for an electric tail rotor as the current information is very sparse. Heres what I have worked out so far for U spirit. The swash all works fine its the tail set up and gyro. I have Connected the 2nd ESC to Channel 4 (rudder) Changed the setting in the software to enable the electric tail. thats about it. Does the U-spirit or the transmitter do the mixing. |
|
| Author: | ZeXx86 [ Wed 16. Oct 2024 14:21:29 ] |
| Post subject: | Re: Electric tail rotor |
Hello, no need to set anything else except Tail ESC range. This can be done in the Limits tab (PC Software). You might need to set Rudder ESC Frequency - Servos tab, Rudder Delay, Pirouette Consistency - Advanced tab,. Yes, Spirit will do all the required mixing. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|