| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Spirit GTR, CH0 for power-backup https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=6203 |
Page 1 of 1 |
| Author: | Manni [ Thu 26. Sep 2024 12:01:30 ] |
| Post subject: | Spirit GTR, CH0 for power-backup |
Hello, I want to use the Spirit GTR. Is it possible tu use CH0-pin of the GTR for a power-backup (IISI Safety Caps 3x50F (Buffer))? Thank you for your support Greetings Manni |
|
| Author: | ZeXx86 [ Thu 26. Sep 2024 12:11:16 ] |
| Post subject: | Re: Spirit GTR, CH0 for power-backup |
Hello, yes, this port is perfect for this purpose. |
|
| Author: | curmudgeon [ Thu 26. Sep 2024 22:07:31 ] |
| Post subject: | Re: Spirit GTR, CH0 for power-backup |
Yes. The CH0 port is excellent for a capacitor buffer. In fact, all the ports in the rail will work for this purpose except for the ports on either end (SYS and EXT/RPME2). |
|
| Author: | HeliMLM [ Fri 27. Sep 2024 6:39:24 ] |
| Post subject: | Re: Spirit GTR, CH0 for power-backup |
... and you can switch it off via TX when on CH0 - as i am doing it with those caps on all of my helis. |
|
| Author: | DaKi [ Fri 27. Sep 2024 20:14:29 ] |
| Post subject: | Re: Spirit GTR, CH0 for power-backup |
aaaand it would be great to have logic out for that channel. Many buffer packs don't have a signal input. I just used a simple transistor to emulate the button press. PWM out on CH0 cannot be used then.... So pleaaase, "a simple logic out" option. THX! |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|