| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Governot Spirit GTR https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=6148 |
Page 1 of 1 |
| Author: | gerry [ Mon 01. Jul 2024 8:08:27 ] |
| Post subject: | Governot Spirit GTR |
Use Spirit GTR with Jeti. I have the following problem: If I switch to the workbench without ror blades at 1500RPM bailout and then turn it off again, the internal governor quickly starts up again as intended, but unfortunately it goes up to about 1900RPM. My question is this normal without rotor blades? I have not had this problem with other helicopters with the GTR so far. |
|
| Author: | ZeXx86 [ Mon 01. Jul 2024 9:36:04 ] |
| Post subject: | Re: Governot Spirit GTR |
Checking RPM without rotor blades can be very inaccurate. So it does not make sense to measure it. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|