I have decreased the value and everything is fine
| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Tail oscillation by using rescue funktion https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=611 |
Page 1 of 1 |
| Author: | Voodoo2 [ Wed 22. Apr 2015 9:03:12 ] |
| Post subject: | Tail oscillation by using rescue funktion |
Hello, when I use the rescue function (Acro) the tail gets an quick oscillation. How can I change this? (Voodoo600 BLS251 Servo) Regards Jens |
|
| Author: | linux-user [ Wed 22. Apr 2015 9:25:48 ] |
| Post subject: | Re: Tail oscillation by using rescue funktion |
Voodoo2 wrote: when I use the rescue function (Acro) the tail gets an quick oscillation. What is your gyro-sense? Maybe gyro is set to high. It also may help, if you post your settings here. |
|
| Author: | ZeXx86 [ Wed 22. Apr 2015 11:01:34 ] |
| Post subject: | Re: Tail oscillation by using rescue funktion |
Hello, you have to configure Gyro Gain to the same value as in your conventional flight. So if you are using +60% for normal flying, for the rescue you have to set -60%. You can also decrease little bit for the rescue. |
|
| Author: | Voodoo2 [ Fri 24. Apr 2015 10:10:58 ] |
| Post subject: | Re: Tail oscillation by using rescue funktion |
I have decreased the value and everything is fine
|
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|