| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Instant Boot and Short Time Loss Voltage Recovery https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=6056 |
Page 1 of 1 |
| Author: | davehour [ Mon 08. Apr 2024 13:49:31 ] |
| Post subject: | Instant Boot and Short Time Loss Voltage Recovery |
Hi, Does the loss voltage for short time recovery is supported in the Spirit Pro? Thanks, David |
|
| Author: | ZeXx86 [ Mon 08. Apr 2024 19:43:01 ] |
| Post subject: | Re: Loss Voltage Recovery |
I am sorry but I am not sure what do you exactly mean so it is not possible to answer. What do you mean by short time? BEC voltage should never drop more than 1V even in hard 3D. If so, you have to fix it otherwise you are at the edge of loosing your model at any moment - for example due to receiver or servo failure. Receiver and Servos require much higher voltage in the most cases than Spirit unit. So Spirit unit can usually survive the longest time. |
|
| Author: | davehour [ Tue 09. Apr 2024 0:07:49 ] |
| Post subject: | Re: Loss Voltage Recovery |
I meant from v3.5.0 release notes: Support for Instant boot with recent Spirit units: New feature that will allow instant booting after Flashing (apply for updates from version 3.5+). Unit will boot up without waiting. When unit will loss voltage for short time it is able to fully recover instantly when flying enhancing safety. Spirit GT and Spirit GTR: Improved safety when unit is hit by a very strong static dischage. In this case unit is able to recover when flying avoiding crash. |
|
| Author: | davehour [ Wed 15. May 2024 21:34:01 ] |
| Post subject: | Re: Loss Voltage Recovery |
Are the instant boot after flashing and instant recovery from short time loss voltage supported in the Spirit Pro? |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|