| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| (Solved) Telemetry Hobbywing 120a V4 Futaba 18SZ https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5995 |
Page 1 of 1 |
| Author: | Boebe [ Fri 16. Feb 2024 21:48:31 ] |
| Post subject: | (Solved) Telemetry Hobbywing 120a V4 Futaba 18SZ |
I did everything mentioned in the manual, esc with latest non Vbar firmware, Spirit GTR setup as per manual, S-bus cable in S-bus2 port of R7008SB, telemetry setup in transmitter but nothing on the screen. Any suggestions on how to get telemetry data on the screen? |
|
| Author: | toni67 [ Sat 17. Feb 2024 9:26:46 ] |
| Post subject: | Re: Telemetry Hobbywing 120a V4 Futaba 18SZ |
Boebe wrote: I did everything mentioned in the manual, esc with latest non Vbar firmware, Spirit GTR setup as per manual, S-bus cable in S-bus2 port of R7008SB, telemetry setup in transmitter but nothing on the screen. Any suggestions on how to get telemetry data on the screen? As far as I know: Spirit GTR has a receiver builtin and will not work with the Futaba receiver. You need a Spirit GT. Connect the telemetrie from the Hobbywing ESC directly to the Futaba receiver. |
|
| Author: | Boebe [ Sat 17. Feb 2024 16:06:00 ] |
| Post subject: | Re: Telemetry Hobbywing 120a V4 Futaba 18SZ |
Attachment: IMG_4416.jpeg [ 2.15 MiB | Viewed 468 times ] I changed the telemetry settings to kontronic esc and now it works. It’s in the manual but I selected Hobbywing ESC. With the Hobbywing telemetry sensor I didn’t get the rpm right. Now, with the Telem uni cable I have all the info I need. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|