Spirit System https://www.spirit-system.com/phpBB3/ |
|
Spirit GTR with both Geolink AND Cool Kosmik Telemetry? https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5859 |
Page 1 of 1 |
Author: | AndrewJohnHawes [ Sun 29. Oct 2023 10:57:41 ] |
Post subject: | Spirit GTR with both Geolink AND Cool Kosmik Telemetry? |
I currently have a Geolink V2 linked via Sat 1 to my Spirit GTR. Is it also possible to link a Kontronik Cool Kosmik 160A HV to the GTR using the Sat 2 port with the Spirit Kontronik lead or via a Telme cable to the GTR telemetry sensor port? Or must the Kontronik telemetry cable be linked via Sat 1 and is it still either one or the other, Geolink or Telemetry only? Many thanks for any insights. I have not used the Kontronik Cool Kosmik recently and last used it with the JLogs a while ago, so am a little unfamiliar with the Spirit cable or the Telme! It seems the Spirit cable for Kontronik has the JST-ZH for the satellite port and the TelMe has a servo connector? Andy |
Author: | Mattes61 [ Sun 29. Oct 2023 13:25:34 ] |
Post subject: | Re: Spirit GTR with both Geolink AND Cool Kosmik Telemetry? |
Hello, you have looked at this pages ? Link: https://manual.spirit-system.com/index.php?title=Kontronik_Telemetry |
Author: | AndrewJohnHawes [ Sun 29. Oct 2023 13:41:21 ] |
Post subject: | Re: Spirit GTR with both Geolink AND Cool Kosmik Telemetry? |
Thank you Mattes61, Yes I have seen that page, but the images of cables in the Spirit shop and in their manual do not necessarily look the same and I am still confused as to which will work with my older Kontronik Cool Kosmik! |
Author: | Mattes61 [ Mon 30. Oct 2023 11:59:45 ] |
Post subject: | Re: Spirit GTR with both Geolink AND Cool Kosmik Telemetry? |
Hello, I have no Kontronik ESC so that I can not verify that what cable you need - you must look in the settings of your Kontronik ESC if transmission with TelMe is possible - As said in the link you must have the latest firmware in your ESC - The Kontronik V2 cable is made for Jeti telemetrie as said - https://manual.spirit-system.com/index.php?title=TelMe_Telemetry If your ESC has not the possibility to set data transmission with TelMe you should take the other cabe... https://manual.spirit-system.com/index.php?title=Kontronik_Telemetry Tomas can definitely help you, maybe he can also say something about it - Edit: False Link corrected ! (TelMe) 31.10.2023 - sorry - |
Author: | ZeXx86 [ Mon 30. Oct 2023 13:13:24 ] |
Post subject: | Re: Spirit GTR with both Geolink AND Cool Kosmik Telemetry? |
Hello, linked page is not correct. It is for OLD (deprecated) protocol. For the latest telemetry protocol you have to proceed according this guide: https://manual.spirit-system.com/index. ... _Telemetry Wiring there is much easier. |
Author: | AndrewJohnHawes [ Mon 30. Oct 2023 21:19:10 ] |
Post subject: | Re: Spirit GTR with both Geolink AND Cool Kosmik Telemetry? |
Thank you, Tomas, I will get one of those cables! The link you mentioned specifies the 'primary' satellite socket Sat1, so I guess if I already have the Geolink connected into Sat1, then I cannot use the cable for Kontronik telemetry at the same time? I know this situation has been asked about before, but I have not seen a solution yet. I just thought that because the old TelMe had a servo connector that it may have worked directly to the Spirit unit? The secondary satellite port, Sat2, will not work then for telemetry? Regards, Andy |
Author: | Mattes61 [ Tue 31. Oct 2023 12:58:13 ] |
Post subject: | Re: Spirit GTR with both Geolink AND Cool Kosmik Telemetry? |
Hello, the link is now corrected - The text to TelMe was fine, the link was the same as below... and that wasn't right - sorry ! Look in the manual for the geo link here it states the geolink should be connected to sat2 port: https://manual.spirit-system.com/index.php?title=GeoLink_Mounting See under point wiring (Spirit GTR): Attachment:
|
Author: | AndrewJohnHawes [ Wed 01. Nov 2023 0:38:30 ] |
Post subject: | Re: Spirit GTR with both Geolink AND Cool Kosmik Telemetry? |
Really good to know, thanks, Mattes61. I will test the Geolink connection first in Sat1, before changing the ESC to Kontronik Kosmik from the older heli and trying telemetry in the Sat1 socket. Andy |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |