| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| [SOLVED] Bluetooth Module https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=580 |
Page 1 of 1 |
| Author: | Amdxp [ Sat 04. Apr 2015 9:09:02 ] |
| Post subject: | [SOLVED] Bluetooth Module |
Hello everyone I have a question concerning the Bluetooth module and that you can leave the moment during the operation plugged into the SYS port if the connection is disconnected via Bluetooth or you have to remove the modules for safe operation of the SYS port. |
|
| Author: | ZeXx86 [ Sat 04. Apr 2015 9:28:31 ] |
| Post subject: | Re: Bluetooth Module |
I recommend to unplug the module from the SYS port, or you can install switch that will enable power supply for BT module. It is because of security reasons and interference with radio signal. |
|
| Author: | buell47 [ Sun 05. Apr 2015 20:21:06 ] |
| Post subject: | Re: Bluetooth Module |
If you just remove the SYS connector, then Bluetooth stay active. Interference with radio signal will stay....both working in 2,4GHz...is it not better just disconnect power? Right, or i´m wrong? |
|
| Author: | error414 [ Sun 05. Apr 2015 20:38:02 ] |
| Post subject: | Re: Bluetooth Module |
yes, i strongly recommend disconnect power before flight. |
|
| Author: | linux-user [ Mon 06. Apr 2015 18:46:57 ] |
| Post subject: | Re: Bluetooth Module |
error414 wrote: yes, i strongly recommend disconnect power before flight. Just to clarify: Do you think it is safe to leave SYS port connected to BT, as long as power to BT is disconnected? Manfred |
|
| Author: | ZeXx86 [ Mon 06. Apr 2015 18:51:26 ] |
| Post subject: | Re: Bluetooth Module |
It is better to turn off the power because of possible interference. |
|
| Author: | linux-user [ Wed 08. Apr 2015 7:43:34 ] |
| Post subject: | Re: Bluetooth Module |
Sorry to ask again, but it is still not clear to me. We have 3 connections of the BT - logical in the software - physical power of the BT - physical signal to the SYS-Port Question: Do we need to disconnect all 3 connections to be save? Is it sufficient to: - disconnect logical in the software - disconnect power of the BT but leave plug in SYS-Port |
|
| Author: | error414 [ Wed 08. Apr 2015 20:39:38 ] |
| Post subject: | Re: Bluetooth Module |
It is sufficient disconect power of BT. The best is use some power switch. |
|
| Author: | btheli [ Sun 24. May 2015 16:59:46 ] |
| Post subject: | Re: Bluetooth Module |
Could someone please recommend a small power switch that would work for this? For tuning I want to avoid having to plug/unplug the unit every time I want to make a change. |
|
| Author: | ZeXx86 [ Thu 28. May 2015 12:50:39 ] |
| Post subject: | Re: [SOLVED] Bluetooth Module |
You can find some here: http://www.ebay.com/bhp/rc-on-off-switch |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|