Hello,
thats not very hard - you have Direct Drive gear ratio is "1" -
Sensing divider is 21 as you said -
Regards !
Attachment:
Screenshot 2023-08-21 205223.jpg [ 148.75 KiB | Viewed 311 times ]
| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Goblin RAW 420 Telemetry question https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5789 |
Page 1 of 1 |
| Author: | Jetihead [ Sun 20. Aug 2023 14:51:29 ] |
| Post subject: | Goblin RAW 420 Telemetry question |
HI all New user of Spirit GTR and Geolink and in process of setting up my Goblin RAW 420. My question relates to the telemetry settings. I have a Hobbywing V4 installed and wired such that i get RPM back on my Jeti DC24. in the telemetry section of spirit settings app, what do i enter for Gear Ratio? My RAW 420 uses a direct drive motor. The pole count is 42, so i need to enter 21 in sensing divider ( poles /2 ) correct? Thanks in advance. |
|
| Author: | Mattes61 [ Mon 21. Aug 2023 19:58:08 ] |
| Post subject: | Re: Goblin RAW 420 Telemetry question |
Hello, thats not very hard - you have Direct Drive gear ratio is "1" - Sensing divider is 21 as you said - Regards ! Attachment: Screenshot 2023-08-21 205223.jpg [ 148.75 KiB | Viewed 311 times ] |
|
| Author: | Jetihead [ Mon 21. Aug 2023 20:03:49 ] |
| Post subject: | Re: Goblin RAW 420 Telemetry question |
Thank you, i was hoping that was correct. bear in mind this is the first time ive built a heli kit. and the first time ive set up the geometry. also first time to program a FBR . So a lot of firsts for me. ive been on a journey and a steep learning curve so im just making sure im doing it right. this was a project i fancied taking on to challenge myself and keep current. hobbywing 60A v4 Esc, and ive a geolink up top. wish me luck with the test flight. |
|
| Author: | Mattes61 [ Mon 21. Aug 2023 20:10:50 ] |
| Post subject: | Re: Goblin RAW 420 Telemetry question |
Hello, no problem, we all have setted up an FBL and heli at the first time - If you make your settings slowly and carefully then all will work - no worries ! Good luck ! |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|