| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| [SOLVED] BEC slave and Telemetry cable with an Y-cable to E1 https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5764 |
Page 1 of 1 |
| Author: | Manni [ Sat 29. Jul 2023 15:50:16 ] |
| Post subject: | [SOLVED] BEC slave and Telemetry cable with an Y-cable to E1 |
Hi, is it possible to connect the BEC slave cable and the telemetry cable of a Kontronik Kolibri 140 with an Y-cable with the E1 port of a Spirit RS? If yes, I could use the switchable AUX port for the PowerBackup. Greetings Manni |
|
| Author: | ZeXx86 [ Mon 31. Jul 2023 8:04:35 ] |
| Post subject: | Re: BEC slave cable and Telemetry cable with an Y-cable to E |
Hello, yes, it can be used in this way. Slave cable from BEC is not sending any signal normally, but it depends on your ESC. If there is no signal wire from secondary BEC then it will work for sure. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|