It is currently Fri 22. Nov 2024 18:37:29

All times are UTC + 1 hour





Post new topic Reply to topic  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Tue 11. Jul 2023 9:25:04 
Offline

Joined: Sat 29. Apr 2023 21:36:44
Posts: 30
Location: CH
Hello

I am using two Spirit 2, one of them with GeoLink V2. Soxos Strike 7.1 with Spirit 2 and Tron 5.8 with Spirit 2 and Geoink. Both of them are trimmed well and flies fine. The corresponding functions are switched on and off via dedicated channels. The GeoLink worked precisely "out of the box". Position hold, Altitude hold, Return to home work well.

Now I also wanted to try the stability mode and the rescue. So far, this has worked quite well for the Soxos. The rescue also seems to be working.

It doesn't seem to work on Tron with GeoLink. I'm hovering in place at a safe height. When I activate stability mode, the heli tilts sideways and backwards and leaves the position quickly. I have to take countermeasures. I turned off the feature.
When testing rescue, it's similar, the helicopter tilts sideways and pitches upwards.

If I disable the GeoLink, Stability Mode and Rescue work the same as the Soxos. To be on the safe side, I recalibrated the GeoLink at the airfield. With no visible success.

What is the cause? Have I configured something wrong? What's the diffrent between F:Stabilisation (xx) and F:Stabi Function?
Thanks a lot for your help.

_________________
Have a good time
Thomas


Top
 Profile  
 
PostPosted: Tue 11. Jul 2023 9:29:05 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Hello,

please take a look here:
https://manual.spirit-system.com/index. ... g#Drifting

There you can see all possible reasons.
In your case you can directly go to this page: https://manual.spirit-system.com/index. ... ise_Rescue
It will resolve problems with GeoLink, Rescue and all Stabilisation modes.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 14. Jul 2023 11:46:34 
Offline

Joined: Sat 29. Apr 2023 21:36:44
Posts: 30
Location: CH
Hi ZeXx86
thanks for your advise.

After reading I checked the mechanical setup and can say: its perfect. I'm now at the flying field, checked the Spirit and Geolink setups and do the first flight.
And.... Nothing. No malefunction. Everything is pretty well with active Geolink. Pos hold, altitude hold, stability mode and rescue works fine.

I don't know what changed. I will have a look on that.

Thanks. Bye bye.

_________________
Have a good time
Thomas


Top
 Profile  
 
PostPosted: Fri 14. Jul 2023 13:08:31 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Thank you for the message. It could happen for example only after certain maneuvers and certain headspeed.
This can play a role.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: mainstreet and 70 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .