| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Governor not changing speeds https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5714 |
Page 1 of 1 |
| Author: | Eury [ Tue 13. Jun 2023 12:37:23 ] |
| Post subject: | Governor not changing speeds |
I’ve had a couple times now where the governor on my Spirit GT will get stuck at 1 speed and not change as I ask it. It will usually happen after an autorotation where before I’ve been able to switch between my 3 speeds, but after takeoff it’s now stuck at a different speed somewhere in between. Flipping the switch between them does nothing and it won’t return until after a power cycle. This was happening the other day with my Nimbus and a Scorpion Tribunus 2 ESC, but I’ve also had it happen with my nitro. I verified that the transmitter was actually changing the throttle value in both cases. A power cycle fixes it. Any ideas? Logs don’t show any errors. |
|
| Author: | ZeXx86 [ Tue 13. Jun 2023 12:55:38 ] |
| Post subject: | Re: Governor not changing speeds |
Hello, this could happen if: a) RPM signal is very unstable and Governor will never engage b) You are changing banks where Governor is not enabled - some of them can be without governor. c) You are starting motor with Governor turned off and then switching to a Bank where it is engaged. All this could cause that governor will not engage at all and for this reason changing headspeed will not work. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|