| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Futaba S-bus connection problem https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5656 |
Page 1 of 1 |
| Author: | bmnewland [ Mon 08. May 2023 0:31:24 ] |
| Post subject: | Futaba S-bus connection problem |
I have set up two spirit FBL systems with Futaba regular receivers with no problems. I am now using an S bus receiver (Futaba R7003SB Receiver). Per the Spirit Manual, I connected the S bus receiver from the S bus, Port 1 to my new Spirit GT FBL in the rudder port. The Spirit GT does not power up. The Futaba manual says not to use the S bus2 port for non Sbus2 gyros. My power is coming from the ESC BEC to the S bus receiver in the 3/B battery port and will later, add another power cable from the receiver port 2 to the Spirit Aux. port. Don’t know what I’m missing. I would appreciate your help on this. |
|
| Author: | bmnewland [ Mon 08. May 2023 2:30:25 ] |
| Post subject: | Re: Futaba S-bus connection problem |
Never mind. I had the connector reversed in the S bus receiver. Polarity is different from one side to the other. I will continue my set up. Thanks. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|