Spirit System
https://www.spirit-system.com/phpBB3/

AGF Servos
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5643		 Page 1 of 1
Author:  Pascal Feller [ Fri 21. Apr 2023 8:34:28 ]
Post subject:  AGF Servos
Hello everyone. i have a new set of AGF servos, 3x A80BHX-H on swash and A80BHP-H on tail. the swash-servos runs direct after connect to the endpoints and then back to neutral.after that follows the normal initialization. that seems to happen only in this specific constellation: spirit unit and agf servos. i use a GTR with latest firmware (3.5.0) i never see something like that before. is this a problem for the servos?
Author:  ZeXx86 [ Fri 21. Apr 2023 8:39:59 ]
Post subject:  Re: AGF Servos
Hello,

we saw this behavior only with AGF servos. It is possible there is something required to program inside the servos.
Please ask manufacturer of the servo.
Author:  Habásek [ Fri 21. Apr 2023 9:14:50 ]
Post subject:  Re: AGF Servos
Pascal Feller wrote:
Hello everyone. i have a new set of AGF servos, 3x A80BHX-H on swash and A80BHP-H on tail. the swash-servos runs direct after connect to the endpoints and then back to neutral.after that follows the normal initialization. that seems to happen only in this specific constellation: spirit unit and agf servos. i use a GTR with latest firmware (3.5.0) i never see something like that before. is this a problem for the servos?


https://www.agfrc.com/index.php?id=2550
AGFrc AGF-SPV3 USB program card used for AGFrc servo with ASS icon mark. Easy to use and DIY the parameter of the AGFrc servo. AGF-SP V3 is an upgraded version of the AGF-SP V2, it can use for our 1/5 large scale servo A280BHMW /A280BVSW, 4S high voltage servo A86BUMW , as well as helicopter servo A80BHM-H /A80BHN-H /A80BHX-H /A80BHP-H. What's more, all of our programmable servo with ASS icon mark, can click the "Narrow Band" function to be used as the Tail Servo.
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/